## Compare between the performance of the above controllers in terms of time and frequency characteristics.

Consider a system described by the transfer function: G(s)={k(s+1.5)}/{s^2+(1+b/99)s+4} where b equals the last two digits of your student number (for example: if your number is 438123456 then b=56). A) Provide a FULL and comprehensive system analysis of the continues system in both time and frequency domain (unit step time response for k=1: delay time, […]

## Compare between the performance of the above controllers in terms of time and frequency characteristics.

Consider a system described by the transfer function: G(s)={k(s+1.5)}/{s^2+(1+b/99)s+4} where b equals the last two digits of your student number (for example: if your number is 438123456 then b=56). A) Provide a FULL and comprehensive system analysis of the continues system in both time and frequency domain (unit step time response for k=1: delay time, […]

## How does it work (From a consumer’s standpoint) How does it work (From an engine

How does it work (From a consumer’s standpoint) How does it work (From an engineer’s standpoint. What signal processing concepts and principles were used to produce the device, system or process?)

## Determine the new weight value (wb2) connecting hidden layer and output layer (7.5 Marks) and the new weight value (w1) connecting input layer and hidden layer (7.5 Marks)

Learning Goal: I’m working on a electrical engineering discussion question and need support to help me learn. 1- Determine the new weight value (wb2) connecting hidden layer and output layer (7.5 Marks) and the new weight value (w1) connecting input layer and hidden layer (7.5 Marks) Following are the Feed Forward DataInput data i/p 1-2 […]

## Learning Goal: I’m working on a electrical engineering question and need support

Learning Goal: I’m working on a electrical engineering question and need support to help me learn. 1- Determine the new weight value (wb2) connecting hidden layer and output layer (7.5 Marks) and the new weight value (w1) connecting input layer and hidden layer (7.5 Marks) Following are the Feed Forward DataInput data i/p 1-2 i/p […]

## Learning Goal: I’m working on a electrical engineering question and need an expl

Learning Goal: I’m working on a electrical engineering question and need an explanation and answer to help me learn. Write and test a MASM program to perform the following tasks (check the Requirements section for specifics on program modularization): Introduce the program. Declare global constants ARRAYSIZE, LO, and HI. Generate ARRAYSIZE random integers in the […]

## Learning Goal: I’m working on a electrical engineering question and need support

Learning Goal: I’m working on a electrical engineering question and need support to help me learn. 1-Write an AVR program that simulates manually operated traffic lights at a pedestrian crossing. Until no button is pressed a green LED is lit for the cars. After pressing a pushbutton (PA5) the green LED (PC4) will start to […]

## Learning Goal: I’m working on a electrical engineering question and need support

Learning Goal: I’m working on a electrical engineering question and need support to help me learn. just need ward file which has the code 1-Write an AVR program that simulates manually operated traffic lights at a pedestrian crossing. Until no button is pressed a green LED is lit for the cars. After pressing a pushbutton […]

## Learning Goal: I’m working on a electrical engineering question and need support

Learning Goal: I’m working on a electrical engineering question and need support to help me learn. 1-Write an AVR program that simulates manually operated traffic lights at a pedestrian crossing. Until no button is pressed a green LED is lit for the cars. After pressing a pushbutton (PA5) the green LED (PC4) will start to […]

## Learning Goal: I’m working on a electrical engineering report and need support t

Learning Goal: I’m working on a electrical engineering report and need support to help me learn. LAB ACTIVITY: (UPOAD FLUIDSIM FILE) Design the hydraulic circuit and electro hydraulic circuit for the vehicle lift application. Design and demonstrate the electro-hydraulic circuit that meets the following requirementsUse a 4/3 solenoid operated directional control valve to actuate the […]